Partner in Slavonija and Baranja

Partner in Istria and Kvarner

EVlink: Charging solutions for Electric Vehicles

ev-rangeSchneider Electric, a worldwide expert in energy management, offers you a variety of solutions as well as installation and maintenance services for charging electric cars with EVlink.

EVlink charging stations are easy to use, tough, intelligent and universal.

EVlink charging stations are suitable for daily use and compatible with most of electric vehicles. You will find the charging infrastructure that suits you whether you are a private user or a professional.

Find more information about EVlink charging stations by clicking on subtitles below.


Three models of EVlink chargers :

EVlink Wallbox

- Free or controlled access (Key lock)
- With or without attached cable
- Power range: from 3.7 to 22 kW
- For single-phase and three-phase networks
- Water-resistant and shockproof
- Outdoor – indoor installation
- Wall-mounted
- Warranty: 24 months

Place to charge:
- At home
- At home – condominium
- In private parking area

EVlink Parking

- Floor-standing or wall-mounted
- One or two charge points Mode 3 and a charge point Mode 2 / Mode 3
- Free or controlled access (RFID reader)
- Power range: from 1.4 to 23 kW
- Configurable according to your application
- Outdoor – indoor installation
- Water resistant and shockproof
- Warranty: 24 months

Place to charge:
- At home – condominium
- At work
- On-street

EVlink Fast Charge

- Two or three charge points Mode 3 and Mode 4 (one charge point in option)
- Free or controlled access (RFID reader)
- Max DC Output power: 50 kW, CHAdeMO and Combo 2 type connector
- Max AC current power: 43 kW Type 2 connector
- For three-phase network
- Outdoor – indoor installation
- Floor-standing
- Warranty: 24 months

Place to charge:
- In a parking area
- In a service station area



Extensive choice
Range of 14 charging stations:
- Rated charging power: 3.7, 7.4, 11 or 22 kW
- T2 Socket outlet with or without shutter or attached cable with T1 or T2 connector
- High robustness of socket outlet (Type 2 or Type 2 with shutters) thanks to silver plated contact avoiding overheat

- High protection against mechanical impacts: IK10
- Suitable for outdoor use: IP54

Easy to use
- ‘Plug & charge’
- One-touch stop/restart
- The enclosure serves as a hanger for the attached cable
- Technical documentation: installation sheet and quick start guide in different languages

Energy management option
- Delayed start allows only charging during off-peak hours or temporary current limitation (from 16 A to 10 A or from 32 A to 16 A) to reduce the overall
building consumption.
- The option can be activated through an external contact hardwired to the station.

Characteristics of the power supply network
- 220-240 V single-phase – 50/60 Hz for 3.7 and 7.4 kW charging stations
- 380-415 V three-phase – 50/60 Hz for 11 and 22 kW charging stations
- Earthing system: TT, TN or IT

Mechanical and environmental characteristics
- Ingress protection code: IP54
- Impact protection code: IK10
- Operating temperature: -30°C to +50°C
- Storage temperature: -40°C to +80°C
- Attached cable length: 4 m
- Energy management: deferred charging start or charging current limitation (16 A to 10 A, 32 A to 16 A)

Access control
- By key lock

- 24 months for the entire EVlink range NEW

- IEC/EN 61851-1 ed 2.0
- IEC/EN 61851-22 ed 1.0
- IEC/EN 62196-1 ed 2.0
- IEC/EN 62196-2 ed 1.0

 Place to charge:

- At home
- At home – condominium
- In private parking area







EVlink Wallbox details (Click on image to enlarge)


Extensive choice
Charging station offer:
- Compliant with power supply network : 220-240 V / 380-415 V
- 7,4 kW or 22 kW (32 A for 230 / 400 V) and settable from 6 A to 32 A
- High robustness of Socket outlet (Type 2 or Type 2 with shutters) thanks to silver plated contact avoiding overheat
- Multiple configurations: user identification, one or two sockets outlets, floor-standing or wall-mounted

Accessories and service:
- Cables, RFID badges, cable holder, modem,Floor base, wall base, socket outlet, caps, flap …
- Worldwide network of certified installers providing on-site installation, on-site commissioning, maintenance plan and on-demand repair and asset management contracts.

Optimized architecture
- Stand-alone or clustered architecture
- Connected or not to a supervision (Through OCPP 1.5 communication protocole)
- Electrical protection devices in external cabinet or in the parking station floor base

Easy installation
- Only one person required to carry and to handle
- Technical documentation for: installation, commissioning and diagnostic in

Power supply network
- Earthing system: TT, TN or IT
- Frequency: 50 Hz or 60 Hz
- Power circuit voltage (for each socket outlet):
    220 / 240 Va 1P+N
    380 / 415 Va 3P+N
– Control circuit voltage (for charging station):
    220 / 240 Va 1P+N

EVlink-Parking-namjenaCharging mode
- Mode 3 with T2 or T2 with shutter socket outlet
- Mode 2 with domestic socket
– Type E (standard FR) limited to 10 A
– Type F (standard DE) limited to 10 A
- Communication between charging station and vehicle via charging cable as per IEC 61851 RFID reader
- Access to the socket outlet by unlocking the flap after swiping the badge in front of the reader
- Badges supported: Standard 13.56MHz, protocoles ISO/IEC 14443 A & B, ISO/IEC 15693, Mifare Ultralight, Mifare Classic, Calypso, For any other badges contact Schneider-Electric
- 10 badges supplied with each charging station equipped with a reader

Mechanical and environmental features
- Material: painted steel, with corrosion protection treatment on covers
- Degree of protection (EC 60529): IP54
- Degree of mechanical protection (IEC 62262): IK10
- Working temperature from -25°C to +50°C (for Mode 2/Mode 3 charging station, refer to the product datasheet on Schneider Electric website)

IT Network connection
- TCP/IP protocol supported
- Data retrieved via FTP, SMTP and HTTP
- Authenticate with an external system, get charging station status, send commands and receive CDR (charge detail records)

- 24 months for the entire EVlink range NEW Certification
- CE and CB scheme (IEC 61851-1 and IEC 61851-22 standards)
- EV and ZE ready
- EAC certification

Place to charge:
- In a parking area
- In a service station area













EVlink Parking architecture types (Click on image to enlarge)

The choice
A high end level product and several services:
- Installation management on your site
- Fast charge commissioning according to your application requirements
- 3 levels (Ultra, Prime and Plus) maintenance contract
- On call and remote assistance in major countries worldwide
- Charging station upgrade with the latest firmware

EVLINK-fast-chargeInstallation and commissioning
- Performed by Schneider Electric or certified Partner.
- A feasibility study should be carried out to assess the facility’s ability. It will stipulate the necessary power, identify electrical duct routing, etc.
- The optimum level of protection and monitoring for the charging station.

- Online charging station support and diagnosis
- Online software upgrades

Mechanical and environmental features
- Degree of protection: IP54 (except cordsets)
- Degree of mechanical protection: IK10
- Working temperature: -30°C / +50°C

Power supply network and charging mode
- Power supply: 400 Va (+10/-15%), 3 Ph, 50-60 Hz
Direct current charging station
- Charging in mode 4 (IEC 61851-23)
- CHAdeMO type connector
- Combo 2 type connector
- Charging voltage/current: 500 V DC / 125 A – 485 V DC with CHAdeMO connector
- Electrical protective devices integrated in the charging station
- Cable length: 4 m

Alternating current charging station
- Charging in mode 3 (IEC 61851-22)
- Charging voltage/current: 400 V AC / 63 A AC
- Electrical protective devices integrated in the charging station
- Cable length: 4.4 m

User dialogue and data
- Backlit LCD graphic screen (2 lines)
- 4 sensitive touch buttons
- 3 twin-coloured LED status indicators

Available options
- Painting and skinning (stickers)
- Supervision connection (Third party Supervision integration / On request)
- Payment (On request)
- Subscriber barcode reader

- IEC 61851-1:2010
- NF EN 61851-22:2002
- IEC 62196-1:2012
- IEC 61851-23:2014

EVlink Fast Charge stations are designed to charge a vehicle rapidly:
80% of capacity charged less than 30 minutes.
They are intended for service stations in particular.

The charging mode determines the protection level, speed and effectiveness of charging.








The charging modes  (Click on image to enlarge)







Connectors  (Click on image to enlarge)













Evlink effective charging capacity /  charging speed   (Click on image to enlarge)



Partner in Slavonija and Baranja

Partner in Istria and Kvarner

Menu Title