Partner in Slavonija and Baranja

Partner in Istria and Kvarner

Rittal Enclosures

There is various sizes of enclosures in Rittals offer:

  • Small and compact enclosures
  • Enclosure systems
  • Console and PC enclosure systems
  • Support arm systems and operating housings
  • Stainless steel housing and enclosure systems

Over 9 million already in use – the Top enclosure system TS 8. Rittal’s expertise is acquired from 15,000 enclosures and housings per day

Your benefits:
As a system provider, Rittal is the world’s leading supplier of innovative enclosure technology. Rittal meets very high standards of security, ergonomics, energy and cost efficiency.

Faster – Software tools for efficient engineering and a huge range of products available for immediate delivery
Better – A comprehensive range of system accessories for individual installation and fast assembly
Everywhere – A contiguous global delivery and service network


Polycarbonate enclosures PK
Housings of fibre-glass reinforced polycarbonate with either grey or transparent cover. Protection category IP 66.

Cast aluminium enclosures GA
Spray-finished cast aluminium enclosure. Protection category IP 66.

Terminal boxes KL
Spray-finished enclosure with sheet steel cover, with or without gland plate.

E-Box EB
Spray-finished enclosure with door and mounting plate of sheet steel. Protection category IP 66.

Bus kućišta BG
Enclosure with door of sheet steel, spray-finished with polycarbonate viewing window. Protection category IP 65.



Compact enclosures AE
Enclosure with door of sheet steel, spray-finished with mounting plate and gland plate in the base Protection category up to IP 66.

Compact system enclosures CM
Enclosure with door of sheet steel, spray-finished and open base to accommodate base plates. Protection category IP 55.

Plastic enclosures KS
Enclosure with door of of fibre-glass reinforced, non-saturated polyester, with mounting plate. Optionally with or without glazed door. Protection category IP 56 or IP 66.



Baying systems TS 8
TS 8 baying systems – a system platform for just about any application. Every enclosure when used in conjunction with the system accessories, is a specialist for very specific tasks.

Baying systems TS 8, power distribution
Baying systems TS 8, for low-voltage switchgear with design certificate to IEC 61 439-1/-2 and DIN EN 61 439-1/-2

System enclosures SE 8
Full integration in the TS 8 product family. Stable enclosure body with two integrated mounting levels, screw-fastened rear panel and sheet steel door. Interior installation fully compatible with TS 8.



The new IT platform based on TS 8 for all applications Intelligent enclosure and accessory system with reduced complexity and assembly friendly plug & play technology. Load capacity 1500 kg.

Distributor racks
Distributor racks for optimum accessibility from all sides during assembly and installation in addition to unrestricted airflow, due to the open design.

Network and server enclosures based on TS 8. Load capacity depending on the design up to 1000 kg.

TE 7000
The entry-level model. The 482.6 mm (19″) frame rack may be dismantled easily for optimum accessibility and delivery.



Compact 482.6 mm (19″) enclosure for small networks that may be used as a wall-mounted, under-desk or desktop enclosure.

482.6 mm (19˝) enclosure that may be dismantled and can be used as a wall-mounted or floor-standing enclosure.

Wall-mounted enclosure with optimum use of the interior space thanks to removable cover. Status monitoring via viewing window.

Wall-mounted enclosures EL
Wall-mounted enclosure 2- or 3-part with viewing window Protection category IP 54 or IP 55.

Wall-mounted enclosures AE
Wall-mounted enclosure for small networks with a high protection category.

Small fibre-optic distributor
Small fibre-optic distributor of fibre-glass reinforced polycarbonate with mounting plate and PG cable glands. Protection category IP 66.



TopConsole system TP
The components of the TP TopConsole system can be combined in many user-specific variants.

One-piece consoles
One-piece TP consoles, ready-to-assemble unit with high protection category IP 55 in four different widths.

Universal consoles TP
Universal consoles TP, high level of stability and high protection category because the body is more or less manufactured from a single piece.

PC enclosure systems
Secure accommodation of all PC components, from monitors, to PCs, to keyboards. For ultimate ease of operation in a modern design. Perfect protection from humidity and dirt, temperature fluctuations and unauthorised access.

Enclosure for tower PC
Compact enclosure, ready to connect for standard commercially available tower PCs. Protection category IP 55.

Industrial Workstations
Industrial workstations are a comprehensive modular system for professional workstations.



Command panel
The right enclosure to suit any application. Different designs for individual adaptation to your respective requirements. Huge range of standard products available from stock. Matched to the Rittal support arm and stand systems.

Support arm systems
Designed for the static loads from 400 to 1800 N. Endless possibilities for combination, with a broad diversity of functions. Reliable cable protection in all applications. Perfect planning tool for the fast and safe design of the support arm system to suit your application.

Stand systems
Strong pillars for your application. They meet all your ergonomic and technical requirements. Suitable for secure accommodation of cables in every enclosure type.



Hygienic Design Terminal Boxes HD
Enclosure with 3° all-round tilt on the enclosure sides and 10° on the cover. All-round gap-free silicone seal incl. hygiene-compliant hexagon quick-release fasteners.

Hygienic Design Compact Enclosures HD
Enclosure with 30° roof tilt. Interior hinges, an all-round gap-free silicone seal and hygiene-compliant lock inserts ensure that the design meets cleanliness standards.

Hygienic Design accessories
Accessories such as levelling feet, wall spacer brackets and cable glands are designed to meet hygienic requirements.



Small enclosures

  • Switch housing made from stainless steel 1.4301 (AISI 304) with switch cut-outs, diameter: 22.5 mm. Protection category IP 66.
  • KL Terminal boxes, stainless steel 1.4301 (AISI 304), Protection category IP 66.
  • Stainless steel bus enclosures 1.4301 (AISI 304), incl. 180° hinge. Protection category IP 66.

Compact enclosures
AE stainless steel compact enclosures 1.4301 (AISI 304) or 1.4404 (AISI 316L), incl. mounting plate. Protection category IP 66, IP 55 for 2-door enclosures.

Enclosures enclosures

  • TS 8 baying systems, stainless steel 1.4301 (AISI 304), incl. mounting plate. Protection category IP 55.
  • TS 8 baying systems, stainless steel 1.4301 (AISI 304), incl. mounting plate. Protection category IP66, complies with NEMA 4X.
  • Enclosure widths ranging from 600 to 1200 mm Time-saving assembly work due to the roll-formed side panels
  • Increased protection due to IP 66 / NEMA 4X. Time-saving assembly work due to the roll-formed side panels

One-piece consoles Stainless steel
Stainless steel one-piece consoles 1.4301, (AISI 304), ready-to-use unit with high protection category IP 55 in four different widths.

PC enclosure systems Stainless steel
PC enclosure systems based on SE, stainless steel 1.4301, (AISI 304), for the secure accommodation of all your computer equipment, from the monitor, computer system, printer, keyboard to the mouse.

Command panel
Operating housings and support arm systems made of stainless steel 1.4301 (AISI 304).

  • Premium panel, stainless steel 1.4301 (AISI 304), resistant to high-pressure cleaning, protection category IP 69K.
  • Command panel housing with door, stainless steel 1.4301 (AISI 304) with aluminium handle strips. Door opening on the front. Protection category IP 66. Cut-out and reinforcement for CP-L support arm system, Ø 130 mm.

Support arm system CP 40, stainless steel

  • Support section CP 40, stainless steel Solid – Attached to the connection components via 2 clamping screws.
  • N Tilting adapter 10° CP 40, stainless steel
  • Mounting bracket CP 40, stainless steel
  • Coupling CP 40, stainless steel
  • Angle piece 90° CP 40, stainless steel
  • Wall/base mounting bracket, rigid, CP 40, stainless steel
  • Wall/base mounting bracket, swivel, CP 40, stainless steel
  • Wall console CP 40, stainless steel
  • Connection console – For rear connection of slimline operating housings. Removable lid for simple cable entry


Ex enclosures
Empty enclosures providing ideal conditions for applications in the chemical and petrochemical industries, in the offshore sector and in the food industry.

For EMC enclosure configurations Rittal offers with its EMC-shielded enclosures an excellent protection against high-frequency electromagnetic fields.

Interior installation for areas at risk of earthquakes
TS 8 for earthquake zone 1, 2, 3 and 4 to Bellcore These versions have been tested and meet the requirements to Telcordia GR 63-CORE.


CS wall-mounted enclosures
Outdoor enclosures for wall or pole mounting. Enclosure-within-an-enclosure concept, outer enclosure with cut-out at the bottom and integrated louvres on the rear panel and side panels for ventilation.

CS New Basic enclosures
Outdoor enclosure with 100 mm transport plinth and rain canopy with projections on all sides.



Partner in Slavonija and Baranja

Partner in Istria and Kvarner

Menu Title