Partners

sla-small

Partner in Slavonija and Baranja

karpa-small
Partner in Istria and Kvarner

Safety modules

pizzato_safety-modules

 

The CS series safety modules have been studied with clear aims of safety and reliability for the product. The design, development and production of these units have been faced with the passion for quality that distinguishes Pizzato Elettrica, adding further controls where possible. Maximum safety is the basic principle for this range of products.

pizzato_SM 01

  • Single or dual channel input circuit, 24 Vac/dc; 120 Vac; 230 Vac; 10 … 30 Vdc power supply
  •  SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1
  •  Automatic, monitored or manual start versions
  • Versions with inputs proper to control electromechanical contacts, electrosensible devices with PNP output, safety magnetic sensor and safety mats and bumpers with 4 wires technology
  • Small housing, screw or spring terminals
  • Several combination of output contacts

pizzato_SM 02

  • Dual channel input circuit, 24 Vac/dc power supply
  • SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1
  • Automatic, monitored or manual start versions
  • Connectible to electromechanical contacts, to safety mats or to safety edges
  • Small housing, screw or spring terminals
  • Output contacts: 2 NO safety contacts

pizzato_SM 03

  • Single or dual channel input circuit, 24 Vac/dc; 120 Vac; 230 Vac power supply
  • SIL level up to SIL 3 according to EN IEC 62061, Performance Level (PL) up to PL e according to EN ISO 13849-1and safety category up to category 4 according to EN 954-1
  • Fixed time or adjustable time versions
  • 45 mm housing, screw or spring terminals

pizzato_SM 04

  • Fixed time or adjustable time versions, delay on or delay off
  • 24 Vac/dc;120 Vac;230 Vac power supply
  • 45 mm housing, screw or spring terminals

pizzato_SM 05

  • Certificated for bimanual control device type IIIC
  • 24 Vac/dc; 120 Vac; 230 Vac power supply
  • Small housing, screw or spring terminals

pizzato_SM 06

  • Residual voltage at motor-stop selectable on 10 position
  • 24 … 230 Vac/dc supply voltages
  • Possibility to connect single-phase or three phase motors to measuring circuits
  • 45 mm housing, screw or spring terminals

pizzato_SM 07

  • Usable for the expansion of the safety modules contacts
  • Delayed contacts at de-energizing versions (up to 12 sec.)
  • Small housing, screw or spring terminals

pizzato_SM 08

  • Pre-programmed modules for specific applications or for generic safety macro-functions
  • No software to be installed and managed, products immediately operative
  • Suitable to provide circuit solutions at SIL3 (EN 62061), PLe (EN 13849) or category 4 (EN 954-1) levels

pizzato_SM 09

  • Programmable modules for safety functions
  • Programming and Development Software dedicated to Gemnis Studio
  • Suitable to provide circuit solutions at SIL3 (EN 62061), PLe (EN ISO 13849-1) or category 4 (EN ISO 13849-1) levels

sla-small

Partner in Slavonija and Baranja

karpa-small
Partner in Istria and Kvarner

Menu Title